2018 Multiquip High-Cycle Concrete Vibrators FXA60A4

High-cycle vibrators are used with low-slump concrete where consistent power is needed to work a stiff mix into corners, around rebar and remove entrapped air pockets. These vibrators use a three-phase motors at 180 cycles and require a special generator capable of generating 180 cycles. The benefit is these vibrators retain 95% of their power under load.

• Powered by a 4.5-amp electric motor

• Permanently lubricated oversized head bearings for unmatched durability

• Hose can be extended to 45 (13.5 meters)

• Waterproof control box

• Requires high-cycle generator GDP5H