2017 Miller Condor Spray-Air Booms

The all-new Condor GC Series sets a new standard for refined productivity. Step up the new front mounted ladder and into your new comfort zone. Once settled into the stylish new SprayView cab, you'll have a command view of your entire operation and convenient fingertip controls at hand on the new armrest console. Keep an eye on the machine's operation with the new Miller Systems Monitor, and power up a wide range of electronics with the multiple 12 volt access points situated throughout the cab.

The rugged commercial-grade Condor GC is a simple, yet highly efficient mechanical drive. You'll enjoy fast productivity without draining your pocketbook with low fuel consumption and minimal maintenance costs. The mechanical drive train delivers tremendous horse power to the ground where you need it, when you need it most. Choose the Condor that's right for you. A 1000 or 1200 gallon sprayer, with the optional cutting-edge Miller Spray-Air air boom technology, or a 255 cubic foot dry box spreader; the choice is yours.

How the Spray-Air technology works

• The Air Nozzles, spaced every 10 along the air boom, atomizes the spray droplets using Dial-A-Drop technology. This creates the optimum-sized droplets that are not affected by speed and pressure changes, ensuring a uniform application over the entire field.

• The Air Nozzle blasts the spray droplets deep into the crop canopy, ensuring complete top-to-bottom leaf surface coverage. No other application technology can measure up to the total plant coverage from the Spray-Air nozzle.

• Because of the smaller controlled droplets and directed air blast, the Air Nozzle allows for a very efficient use of water, often in the range of 2 to 5 gallons per acre for herbicides, and generally from 5 to 10 GPA with fungicides.

• Maximize Productivity. The superior plant coverage from the use of the Air Shear Nozzle enables you to use only the minimum amount of herbicide required, and no more.

• Lowest Water Volumes. Use the lowest possible carrier volumes for herbicide, desiccant, insecticide, and especially fungicide applications. Spray from 2 to 10 gallons per acre.

• Fungicide Applications That Work. Simply stated, the Spray-Air technology is proven to be the best method to apply fungicides for superior disease control! Benefit from dense canopy penetration and total plant coverage with often only 5 to 10 gallons of water per acre!

• Application Versatility. Three application methods to choose from:

• Spray-Air Air Nozzle application to maximize coverage and efficiency

• Conventional flat fan nozzles for higher volume applications over 10 gallons per acre

• Use conventional nozzles + air blast from the Air Nozzle for classic Air Assist to maximize coverage in higher volume applications

• Environmental Stewardship. Spray-Air owners practice environmental stewardship by using only as much chemical and water as required, reducing soil and water carryover of crop protection products.

• Return on Investment. Operator surveys show $6 to $10 per acre in application cost savings